Tools

Habu – Python Network Hacking Toolkit

computer-network

Habu: Network Hacking Toolkit

I’m developing Habu to teach (and learn) some concepts about Python and Network Hacking.

These are basic functions that help with some tasks for Ethical Hacking and Penetration Testing.

Most of them are related with networking, and the implementations are intended to be understandable for who wants to read the source code and learn from that.

Some techniques implemented in the current version are:

  • ARP Poisoning
  • ARP Sniffing
  • DHCP Discover
  • DHCP Starvation
  • LAND Attack
  • SNMP Cracking
  • SYN Flooding
  • TCP Flags Analysis
  • TCP ISN Analysis
  • TCP Port Scan

Installation

To install Habu, simply:

$ pip3 install habu

Dependencies

Habu requires:

  • Click
  • Delegator.py
  • Python (3.x),
  • Scapy-Python3
  • Matplotlib (Optional, only needed if you want to make some graphs)

Get Help

All the commands implement the option ‘–help’, that shows the help, arguments, options, and default values.

Verbose Mode

Almost all commands implement the verbose mode with the ‘-v’ option. This can give you some extra info about what habu is doing.

habu.arpoison: ARP Poisoning

This command sends ARP ‘is-at’ packets to each victim, poisoning their ARP tables for send the traffic to your system.

$ sudo habu.arpoison 192.168.1.5 192.168.1.6
Ether / ARP is at 00:c2:c6:30:2c:58 says 192.168.1.6
Ether / ARP is at 00:c2:c6:30:2c:58 says 192.168.1.5
Ether / ARP is at 00:c2:c6:30:2c:58 says 192.168.1.6
Ether / ARP is at 00:c2:c6:30:2c:58 says 192.168.1.5
...

Note: If you want a full working Man In The Middle attack, you need to enable the packet forwarding on your operating system to act like a router. You can do that using:

echo 1 > /proc/sys/net/ipv4/ip_forward

habu.arpsniff: Discover devices on your LAN capturing ARP packets

This command listen for ARP packets and shows information each device.

Columns: Seconds from last packet | IP | MAC | Vendor

1   192.168.0.1         a4:08:f5:19:17:a4   Sagemcom Broadband SAS
7   192.168.0.2         64:bc:0c:33:e5:57   LG Electronics (Mobile Communications)
2   192.168.0.5         00:c2:c6:30:2c:58   Intel Corporate
6   192.168.0.7         54:f2:01:db:35:58   Samsung Electronics Co.,Ltd

habu.contest: Check your connection capabilities

This command tries to connect to various services and check if you can reach them using your internet connection.

$ habu.contest
IP:    True
DNS:   True
FTP:   True
SSH:   True
HTTP:  True
HTTPS: True

habu.dhcp_discover: Discover DHCP servers

This command send a DHCP request and shows what devices has replied. Using the ‘-v’ parameter (verbose) you can see all the options (like DNS servers) included on the responses.

$ sudo habu.dhcp_discover
Ether / IP / UDP 192.168.0.1:bootps > 192.168.0.5:bootpc / BOOTP / DHCP

habu.dhcp_starvation: Fill the DHCP leases

This command send multiple DHCP requests from forged MAC addresses to fill the DHCP server leases. When all the available network addresses are assigned, the DHCP server don’t send responses. So, some attacks, like DHCP spoofing can be made.

$ sudo habu.dhcp_starvation
Ether / IP / UDP 192.168.0.1:bootps > 192.168.0.6:bootpc / BOOTP / DHCP
Ether / IP / UDP 192.168.0.1:bootps > 192.168.0.7:bootpc / BOOTP / DHCP
Ether / IP / UDP 192.168.0.1:bootps > 192.168.0.8:bootpc / BOOTP / DHCP

habu.eicar: Prints the EICAR test string

This command prints the EICAR test string that can be used to test antimalware engines. More info: http://www.eicar.org/86-0-Intended-use.html

$ habu.eicar
X5O!P%@AP[4\XZP54(P^)7CC)7}$EICAR-STANDARD-ANTIVIRUS-TEST-FILE!$H+H*

Note: The below string is incorrect because is not a good idea write the complete in this text file. Some antivirus program can be detect it like a virus.

habu.hasher: Computes various hashes with the input data

This command computes various hashes for the input data, that can be a file or a stream.

If the filename is ‘-‘, the data is taken from the standard input (stdin) so, three different variants exists to call this command:

$ habu.hasher README.rst
md5  : 375375d9cfb2aacab7c8d1a9afd3d9b7
sha1 : 21c67b9ef44bc24d47eef6adab648ba34662927e

$ cat README.rst | habu.hasher -
md5  : 375375d9cfb2aacab7c8d1a9afd3d9b7
sha1 : 21c67b9ef44bc24d47eef6adab648ba34662927e

$ habu.hasher - < README.rst
md5  : 375375d9cfb2aacab7c8d1a9afd3d9b7
sha1 : 21c67b9ef44bc24d47eef6adab648ba34662927e

Note: The output above shows only MD5 and SHA1 to make it short, but the real output includes more algorithms.

You can also specify which algorithm to use. In such case, the output is only the value of the calculated hash:

$ habu.hasher -a md5 README.rst
375375d9cfb2aacab7c8d1a9afd3d9b7

habu.ip: Prints your current public IP

This command prints your current public IP based on the response from https://api.ipify.org.

$ habu.ip
182.26.32.246

habu.isn: Prints the TCP sequence numbers for an IP

This command creates TCP connections and prints the TCP initial sequence numbers for each connections.

$ sudo habu.isn www.portantier.com
1962287220
1800895007
589617930
3393793979
469428558

You can get a graphical representation (needs the matplotlib package) using the ‘-g’ option:

$ sudo habu.isn -g -c 10 www.portantier.com

img/isn.png

Note: The above command uses ‘-c’ option to define that 10 connections must be created.

habu.land: Implements the LAND attack

This command implements the LAND attack, that sends packets forging the source IP address to be the same that the destination IP. Also uses the same source and destination port.

The attack is very old, and can be used to make a Denial of Service on old systems, like Windows NT 4.0. More information here: https://en.wikipedia.org/wiki/LAND

sudo habu.land 172.16.0.10
............

Note: Each dot (.) is a sent packet. You can specify how many packets send with the ‘-c’ option. The default is never stop. Also, you can specify the destination port, with the ‘-p’ option.

habu.ping: ICMP echo requests

This command implements the classic ‘ping’ with ICMP echo requests.

$ sudo habu.ping 8.8.8.8
IP / ICMP 8.8.8.8 > 192.168.0.5 echo-reply 0 / Padding
IP / ICMP 8.8.8.8 > 192.168.0.5 echo-reply 0 / Padding
IP / ICMP 8.8.8.8 > 192.168.0.5 echo-reply 0 / Padding
IP / ICMP 8.8.8.8 > 192.168.0.5 echo-reply 0 / Padding

habu.snmp_crack: SNMP Community Cracker

This command launches snmp-get queries against an IP, and tells you when finds a valid community string (is a simple SNMP cracker).

The dictionary used is the distributed with the onesixtyone tool (https://github.com/trailofbits/onesixtyone)

$ sudo habu.snmp_crack 179.125.234.210
Community found: private
Community found: public

Note: You can also receive messages like <UNIVERSAL> <class ‘scapy.asn1.asn1.ASN1_Class_metaclass’>, I don’t know how to supress them for now.

habu.synflood: SYN Flood Attack Implementation

This command launches a lot of TCP connections and keeps them opened. Some very old systems can suffer a Denial of Service with this. More info: https://en.wikipedia.org/wiki/SYN_flood

$ sudo habu.synflood 172.16.0.10
.................

Each dot is a packet sent.

You can use the options ‘-2’ and ‘-3’ to forge the layer 2/3 addresses. If you use them, each connection will be sent from a random layer2 (MAC) and/or layer3 (IP) address.

You can choose the number of connections to create with the option ‘-c’. The default is never stop creating connections.

Note: If you send the packets from your real IP address and you want to keep the connections half-open, you need to setup for firewall to don’t send the RST packets. With habu, you can do this with the following command (only works with Linux+IPTables):

$ sudo habu.firewall --no-rst

You can check the results with “iptables -L -n”, and you will see something like this:

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination
DROP       tcp  --  0.0.0.0/0            0.0.0.0/0            tcp flags:0x04/0x04

habu.tcpflags: TCP Flag Fuzzer

This command send TCP packets with different flags and tell you what responses receives.

It can be used to analyze how the different TCP/IP stack implementations and configurations responds to packet with various flag combinations.

$ sudo habu.tcpflags www.portantier.com
S  -> SA
FS -> SA
FA -> R
SA -> R

By default, the command sends all possible flag combinations. You can specify with flags must ever be present (reducing the quantity of possible combinations), with the option ‘-f’.

Also, you can specify which flags you want to be present on the response packets to show, with the option ‘-r’.

With the next command, you see all the possible combinations that have the FIN (F) flag set and generates a response that contains the RST (R) flag.

$ sudo habu.tcpflags -f F -r R www.portantier.com
FPA  -> R
FSPA -> R
FAU  -> R

CREDITS: portantier
DOWNLOAD Habu

 

 

 

Πηγή : hackingvision

Anastasis Vasileiadis

PC Technical || Penetration Tester || Ethical Hacker || Cyber Security Expert || Cyber Security Analyst || Information Security Researcher || Malware analyst || Malware Investigator || Reverse Engineering

Leave a Reply